Activities and Events

Activities and Events

Events (Lectures, FDP, STC, Workshop and Seminar) Organized

S. No. Event 2018-19 2017-18 2016-17 2015-16 2014-15
1 Expert Lecture 5 4 5 5 2
2 Worksop 2 8 1 2 2
3 Seminar/Symposium 1 3 3 1 1
4 FDP 1 2 1 1 1
5 STC 2 4 0 0 0

Expert Lectures

Name of the event DD/MM/YY Resource Person with designation Academic/Industry Organizer
Lecture on “Technology Trends in Semiconductor Industry and Engineers Employability Enhancement Programme” 22/11/2018 Mr. Gaurav Panwar, Senior Member of Technical Staff, Mentor Graphics, Noida Industry GNIX
Lecture on "Analog Signal Processing using Basic Building Blocks" 15/11/2018 Dr. Dinesh Prasad, Professor, Department of ECE, Jamia Millia Islamia, New Delhi Academic GNIX
Lecture on "VLSI Design - Design of Arithmetic Circuits" 13/11/2018 Dr. D. Vaithiyanathan. D, HOD, Department of ECE, NIT Delhi, New Delhi Academic GNIX
Lecture on "Artificial Intelligence Revolution" 4/10/2018 Tanmay Bakshi - Youngest IBM Watson Programmer Industry Student Council
Lecture on "Research, Innovation & Start-up opportunities based on Smart Neighborhood approach and localized Abundant Circular Economy" 3/10/2018 Mr. Chandra Vikash, Global Convenor for GAIA Industry EEE & EE
Expert Lecture on “Energy Efficient Communication Methods for Wireless Sensor Networks” 23/2/2018 Dr. Syed Akhtar Imam, Dept. of ECE, Jamia Millia Islamia, New Delhi. Academic GNIX
Expert Lecture on “Signal and System” 2/2/2018 Mr. Ankit Goel, Author Arihant Publications Industry GNIX
Expert Lecture on “Industrial Automation” 24/11/2017 Mr.H.S.Sisodia, Maintenance Manager, M/S Moser Baer India Ltd., Greater Noida Industry GNIX
Expert Lecture on “Introduction to VLSI Design Technology” 24/11/2017 Dr. R.S. Saxena, Scientist FSSPL Lab, DRDO, New Delhi Academic GNIX
Lecture on IP Star Satellite Technology 21/4/2017 Mr. Umesh Arya,
Satellite Earth Station, BSNL, Sikandrabad, Bulandshar, U.P.
Industry GNIX
Expert Lecture on Introduction to SOI Technology and Level Crossing Analog and Digital Converter 7/4/2017 Dr. A.K. Gupta, Professor, Department of ECE, NIT, Kurukshetra Academic GNIX
Lecture on Low Power VLSI Circuit design 31/3/2017 Mr. Taranjeet Kulkal, Cadence, Noida Industry GNIX
Seminar on Scope in Medical Electronics 17/2/2017 Mr. G.P.S. Sekhawat,
Director, Horizon Meditech Pvt. Ltd.
Industry GNIX
Expert Lecture on Recent Trend in Wireless Communication 10/10/2016 Dr. Noor Mohammed V, Associate Professor, School of Engineering, VIT University, Vellore Academic GNIX
Seminar on PLC and Industry Automation 22/9/2016 Mr. Harinath Sisodia, O&M Manager, Moserbear, Greater Noida Industry GNIX
Expert Lecture on Recent technologies in Mobile Communication 15/9/2016 Dr. M. Palanivelan, Prof. & Head, department of ECE, Rajalakshmi Engineering College, Chennai Academic GNIX
Expert Lecture on CMOS design 27/4/2016 Dr. R.K. Sharma, Professor, NIT, Kurukshetra Academic GNIX
Workshop on PCB Design tools using ORCAD 1/4/2016 Mr. Rahul Kumar,
3ST Technologies Pvt. Ltd., Noida
Industry GNIX
Seminar on Cyber Security 17/2/2016 Mr. Lokender Bhatia, DuCAT, Noida Industry GNIX
Expert Lecture on Recent Trend in Mobile technologies 15/10/2015 Dr. L. Nithyanandan, Professor, PEC, Pondichery Academic GNIX
Lecture on Challenges and Trends in Embedded System 3/10/2015 Mr. Devendra Khari
Director,
DKOP Lab, Noida
Industry GNIX
Lecture on Career Counseling, Technical workshop & Mock Test 16/9/2015 Mr. Devendra Khari, Director,
DKOP Lab Pvt Ltd,
Noida
Industry GNIX
Workshop on Semiconductor Industry Trends 26/8/2015 Mr. Devendra Khari, Director,
DKOP Lab Pvt Ltd,
Noida
Industry GNIX
Expert Lecture on Multispectral Image Processing 8/8/2015 Dr Shabana Urooj, Gautam Buddha University, Greater Noida Academic GNIX
Seminar on ATMEL Microcontroller 2/4/2015 Dr. M.A. Khan, My Research Labs Ltd., Noida Industry GNIX
Workshop on Design Techniques using Verilog & Xilinx FPGA 2/4/2015 Mr. Devendra Khari, Director,
DKOP Lab Pvt Ltd,
Noida
Industry GNIX
Workshop on Introduction to MATLAB 1/4/2015 Mr. Rahul Kumar, 3ST Technologies Pvt. Limited, Noida Industry GNIX
Lecture on Data / Computer Networking (CCNA) 1/4/2015 Mr. Lokender Bhatia, DuCAT, Noida Industry GNIX
Workshop on PCB designing using PSpice Simulation 1/4/2015 Mr. Rahul Kumar, 3ST Technologies Pvt. Limited, Noida Industry GNIX
Seminar on Recent Advances in Metamaterial Antennas for Biomedical, Optical and Sensing Applications 13/02/15 & 14/02/15 Dr. Sushil Kumar, NPL, New Delhi Industry DST
Lecture on VLSI Design 19/11/2014 Mr. Prashant Dubey,
ST Micro Electronics, Greater Noida
Industry GNIX
Lecture on Semiconductor Industry Trends 13/11/2014 Mr. Devendra Khari
Director,
DKOP Lab, Noida
Industry GNIX
Workshop on Introduction to MATLAB programming and Simulink 19/9/2014 Mr. Sandeep Gupta, Director
3ST Technologies Pvt. Ltd., Noida
Industry GNIX
Lecture on Computer Networking (CCNA) 3/4/2014 Mr Lokender Bhatia, DuCAT, Noida Industry GNIX
Lecture on Verilog and Xilinx FPGA 13/3/2014 Mr. Devendra Khari, Director,
DKOP Lab Pvt Ltd,
Noida
Industry GNIX
Seminar on Introduction to Verilog 27/2/2014 Mr. Sandeep Gupta,
Sofcon India Pvt Ltd., Noida
Industry GNIX
Seminar on Introduction to VHDL 26/2/2014 Mr. Sandeep Gupta,
Sofcon India Pvt Ltd., Noida
Industry GNIX
Expert Lecture on Electronic Instrumentation in Medical Applications 7/2/2014 Dr. Shabana Urooj, Gautam Buddha University, Greater Noida Academic GNIX

FDPs and Short Term Courses

S. No Name of the Event Date Resource Person with designation Organizer/Coordinator Remarks
1 Staff Development Programme on "Recent Trends in Wireless Communication and Techniques" 02-15, July 2012 - Dr. Manish Rai Sponsored by AICTE
2 Faculty Development Programme on "Circuits, Systems and its Applications" 22-26, July 2013 - Mr. Satya P Singh GCET
3 Faculty Development Programme on "Recent Advances in Optical Fiber Communication and Networks" 21-25, July 2014 - Ms. Ruchi Agarwal GCET
4 Faculty Development Programme on "Microcontroller for Embedded Systems" 13-17, July 2015 - Mr. P.C. Joshi GCET
5 Faculty Development Programme on "Image Processing and its Applications" 25 & 29, July 2016 - Mr. Shahid Eqbal GCET
6 Faculty Development Programme on "Advances in Communication and Networking" 17-21, July 2017 - Dr. Deepak Gangwar Sponsored by AKTU
7 Short Term Course on "Optical Fibers: Potential and Applications" 18-22, December 2017 - Dr. R.L. Yadava NITTR, CHandigarh
8 Short-Term Course On “MATLAB and LABVIEW with its Hardware Interface” January 29-February 2, 2018 - Ms. Shristi Priya NITTR, CHandigarh
9 Short Term Course on "Scilab Programming" 14-18, May 2018 - Mr. Upendra Kumar Acharya NITTR, CHandigarh
10 Faculty Development Programme on "Reflection on the Self" 7, June 2018 Dr. Sanjay Kumar, Associate Professor, BIT, Mesra Dr. S.P. Singh GCET
11 Short Term Course on "Advances in OFC Technology" 18-22, June 2018 - Dr. R.L. Yadava NITTR, CHandigarh
12 Faculty Development Programme on "Emerging Trends in Antenna Design and Communication Technologies" 16-20, July 2018 - Dr. R.L. Yadava Sponsored by AKTU
13 Short Term Course on "Next Generation Wireless Technologies" 26-30, November 2018 - Ms. Rekha Rani NITTR, CHandigarh
14 Short Term Course on "Optimization techniques with Engineering Applications" 10-14, December 2018 - Dr. R.L. Yadava NITTR, CHandigarh

Workshop, Seminars and Conferences

S. No Name of the Event Date Resource Person with designation Organizer/Coordinator Remarks
1 One day Seminar on "Recent Advances in Microwave Antennas Technology and Applications" 15, March 2013 - Dr. R.L. Yadava Sponsored by AICTE
2 A National Conference on "Recent Advances in Microwave Antennas for Cognitive Radios and Wireless Communications" 21 & 22, Oct 2013 - Dr. R.L. Yadava Sponsored by DST
3 Two Days Workshop on "VLSI using VHDL/Verilog and Implementation on FPGA" 26 & 27, Feb 2014 Mr. Sandeep Gupta, Sofcon India Pvt Ltd., Noida Mr. Amanpreet Singh Saini Supported by GNIX Society
4 Workshop on "Introduction to MATLAB programming and Simulink" 19, Sep 2014 Mr. Sandeep Gupta, Director
3ST Technologies Pvt. Ltd., Noida
  Supported by GNIX Society
5 Two Days Natioanl Seminar on "Recent Advances in Metamaterial Antennas for Bio Medical, Optical and Remote Sensing Applications" 13 & 14, Feb 2015 - Dr. R.L. Yadava Sponsored by DST
6 Two Days Workshop on "Verilog, Xilinx, CCNA, Matlab and ORCAD" 01 & 02, April 2015 - Mr. Navneeth Sharma Supported by GNIX Society
7 Workshop on "Semiconductor Industry Trends" 26, August 2015 Mr. Devendra Khari, Director, DKOP Lab Pvt Ltd., Noida   Supported by GNIX Society
8 Seminar on "Cyber Security" 17, February 2016 Mr. Lokender Bhatia, DuCAT, Noida   Supported by GNIX Society
9 Workshop on "PCB Design tools using ORCAD" 01, April 2016 Mr. Rahul Kumar, 3ST Technologies Pvt. Ltd., Noida   Supported by GNIX Society
10 Workshop on "Matlab and PCB Designing" 08 & 09, September 2016 - Mr. Amanpreet Singh Sponsored by 3ST Technologies Private Limited
11 Seminar on "PLC and Industry Automation" 22, September 2016 Mr. Harinath Sisodia, O&M Manager, Moserbear, Greater Noida   Supported by GNIX Society
12 Seminar on "Scope in Medical Electronics" 17, February 2017 Mr. G.P.S. Sekhawat, Director, Horizon Meditech Pvt. Ltd.   Supported by GNIX Society
13 A National Symposium on "Emerging Microwave Remote Sensing Technology for Rural Applications" 30-31, March 2017 - Dr. R.L. Yadava Sponsored by DST
14 Workshop on “Internet of Things” 24, Aug 2017 Mr. Amir Khan, APTRON Solutions Pvt. Ltd.   Supported by GNIX Society
15 Workshop on “PCB designing” 25, Aug 2017 Mr. Anthony Selvamuthu, APTRON Solutions Pvt. Ltd.   Supported by GNIX Society
16 Workshop on “Internet of Things using Node MCU” 06, September 2017 Er. Kriti Karan, DKOP Labs Pvt. Ltd., Noida   Supported by GNIX Society
17 Workshop on “Fundamentals of Wireless Mobile Communications” 12-13, October 2017 - Mr. Amanpreet Singh Saini & Ms. Shrishti Priya Huawei Network Academy and Indovision Services
18 One day Seminar on "Potential of Impedance Spectroscopy for Measurement and Sensor Solutions" 15, November 2017 - Dr. Satyaprakash Singh & Ms. Shrishti Priya GCET
19 Workshop on “LED and Sensor Devices” 24, November 2017 Mr. Vivek Kumar Singh, CEO (Director), VS Energy and Automation Pvt. Ltd.   Supported by GNIX Society
20 Two days’ Workshop on "VLSI using Verilog & Implementation on FPGA" 06 & 07, February 2018 Mr. Saurabh Gupta, Mr. Tarun Kalra, Mr. Abhinav Kumar, FutureWiz   Supported by GNIX Society
21 Workshop on "MATLAB" 27 & 28, February 2018 Mr. P. Vikram Kumar, Founder, PADAYI   GCET
22 Workshop on “Introduction to Python Programming” 07, March 2018 Mr. Aman Chaudhary, Aptron Solutions Private Ltd.   Supported by GNIX Society
23 One day Seminar on “RTL Design and Functional Verification” 16, March 2018 Mr. P.R. Sivakumar, Founder and CEO, Maven Silicon, Bengaluru   Supported by GNIX Society
24 One day seminar on “Writing a Project Thesis” 11, May 2018 Dr. Kakoli Dey, Professor, Department of Humanities, GCET, Gr. Noida & Dr. R.N. Mahto, Assistant Professor, Department of Humanities, GCET, Gr. Noida Dr. S.P. Singh Supported by GNIX Society
25 Seminar/Webinar on “VLSI Design Technologies” 21, August 2018 Mr. Manish Singhal, Principal Engineer, True Chip Solutions, Noida Ms. Shristi Priya Supported by GNIX Society
26 Workshop on “IoT Based Google Assistance Project” 24, September 2018 Mr. Amir Khan, Principal Engineer, Aptron Solutions Private Limited, Noida Mr. Amanpreeth Singh Saini Supported by GNIX Society
27 Workshop on “VLSI Design and Embedded - IOT Systems” 27&28, September 2018 Mr. Devender Khari, Mr. Chiranjeev Singhal & Mr. Vikas Sharma, DKOP Labs, Noida Mr. Amanpreeth Singh Saini Supported by GNIX Society and DKOP Labs Pvt. Ltd.

Academics

Updates

  • B.Tech. Program of "Mechanical Engineering" and "Electronics & Communication Engineering" is Accredited by NBA from session 2017-2018 till 2019-2020
  • B.Tech. Program of "Mechanical Engineering" and "Electronics & Communication Engineering" is Accredited by NBA from session 2017-2018 till 2019-2020
  • B.Tech. Program of "Mechanical Engineering" and "Electronics & Communication Engineering" is Accredited by NBA from session 2017-2018 till 2019-2020
  • B.Tech. Program of "Mechanical Engineering" and "Electronics & Communication Engineering" is Accredited by NBA from session 2017-2018 till 2019-2020

Recruiters